Strip pcb Led Light pcb Printed Circuit Board used for Ceiling light
PCBA Capabilities
|
|
Turnkey PCBA
|
PCB+components sourcing+assembly+package
|
Assembly details
|
SMT and Thru-hole, ISO SMT and DIP lines
|
Lead Time
|
Prototype: 15 work days. Mass order: 20~25 work days
|
Testing on products
|
Flying Probe Test, X-ray Inspection, AOI Test, Functional test
|
Quantity
|
Min quantity: 1pcs. Prototype, small order, mass order, all OK
|
Files needed
|
PCB: Gerber files(CAM, PCB, PCBDOC)
|
Components: Bill of Materials(BOM list)
|
|
Assembly: Pick-N-Place file
|
|
PCB Panel Size
|
Min size: 0.25*0.25 inches(6*6mm)
|
Max size: 20*20 inches(500*500mm)
|
|
PCB Solder Type
|
Water Soluble Solder Paste, RoHS lead free
|
Components details
|
Passive Down to 0201 size
|
BGA and VFBGA
|
|
Leadless Chip Carriers/CSP
|
|
Double-sided SMT Assembly
|
|
Fine Pitch to 0.8mils
|
|
BGA Repair and Reball
|
|
Part Removal and Replacement
|
|
Component package
|
Cut Tape,Tube,Reels,Loose Parts
|
PCB assembly process
|
Drilling-----Exposure-----Plating-----Etaching & Stripping-----Punching-----Electrical Testing-----SMT-----Wave
Soldering-----Assembling-----ICT-----Function Testing-----Temperature & Humidity Testing |
Led Light pcb Printed Circuit Board introduction:
Regular aluminum PCBs usually have three major layers:
For the copper layer, we typically use electrolytic copper foil, which we etch to form the printed circuit. This layer holds the SMD components and copper traces on the layer form the necessary interconnections. When compared to a traditional FR4 PCB of the same line width and copper weight, the presence of the aluminum base allows the board to carry more current without heating up.
Forming the core of the board, the insulating layer functions as the electrical insulator, heat conductor, and the bonding material between the copper layer and the aluminum substrate. In the entire buildup, the insulating layer also acts as a thermal barrier for the heat flow from the circuit to the aluminum. Therefore, better the thermal conductivity of the insulating layer, better is the heat management, and lower is the temperature rise of the components. High thermal conductivity not only increases the power output, it also extends the life-span of the board.
We choose a metal for the substrate depending on several factors such as cost, weight, hardness, strength, thermal coefficient of expansion, and thermal conductivity.
A comparative comparison of various metals for cost and technical performance as above shows aluminum to be the optimum choice. Aluminum plates are available as 1000, 1060, 6061, and so on. Depending on requirements for even higher thermal conductivity and mechanical properties, we use other metals in place of aluminum. These include stainless steel, copper, iron, and silicon steel.
Strip pcb Led Light pcb are widely used in LED lighting: Car led light, Ceiling light,Wall light, outdoor led light, living room led lighting,etc.
If you are looking for a resource that will provide you with Single Sided PCB for LED Tube Light, PCB For LED Spotlight, PCB For LED Lamp, PCB for LED high bay, PCB for LED downlight, PCB board for LED tube, then you have just found it.
Shenzhen Yizhuo Electronics Co.,Ltd has been established in 2012 years, Our factory area more than 5,000 square meters. We have more than 100 workers and 20 employees.We are Aluminum PCB and FR4 PCB manufacturer,our products are widely used in lighting, Electronics, New Energy, Medical care ,Automotive and Other industries.Our PCB production capacity can reach 120000 sq.m/per month .
FAQ:
Q1. Do you have MOQ limited?
A: We don’t have any MOQ limited, the minimum order we accept is 1pcs.
Q2: Are all your products certified with UL, ROHS etc?
A: Yes, we are certified to ISO9001:2015, ISO14001:2015, IFA, UL , SGS, ROHS.
Q3: What is needed for PCB PCBA quotation?
A: PCB: Quantity, Gerber file and Technic requirements(material,surface finish treatment, copper thickness,board thickness ,...)
PCBA: PCB information, BOM, (Testing documents...)